CIPP Patch Repairs

A CIPP patch repair is a short length of Cure In Place Pipe (CIPP) liner, used to repair isolated defects within longer pipe lengths.

We at the McAllister group offer patch repairs of two varieties. Using the traditional ambient cured method, or the faster UV Cured method. UV CIPP patches have a curing time of around 10 minutes.

CIPP patches involve essentially the same product and process as CIPP lining, but on a smaller scale. A short sleeve is typically prepared on-site using silicate resin. The appropriate preparations are made according to the type of patch being used. We aim for full structural repair bonding to the existing pipe, even in wet conditions.

This technique is used as it offers a range of benefits;

• Highly resistant to chemicals and abrasion
• Hard surface finish gives improved flow characteristics
• Tapered edges give a smooth flow transition

• Localised patch repairs to drains can smooth over displaced joints, seal cracks and holes. It also reduces the resistance caused by such defects. The net effect of the patch is to increase the flow of solids and liquids. This in turn helps to prevent future blockages in a problem drain.
• The patch repair also prevents further root ingress or water ingress by sealing the pipe internally and restoring the structural stability to the pipe. This method is successfully used worldwide to seal pipes with water infiltration or pipes that have failed air tests which can prevent sewer adoption.
• If there are multiple defects in a pipe, a judgement needs to be made as to whether multiple patches or a full length liner is appropriate. The decision is normally made by balancing the relevant costs and the probability of further degradation of in the areas that would not be repaired by patching.

In most cases, we make use of the EPROS system. This allows us to repair damages without excavation, and from one access point. This system, which has passed the WRc short-term hydrostatic testing procedures and is used extensively throughout the world. WRc approval is assurance the the product is fit-for-purpose, and can be relied upon. We enjoy a collaborative working relationship with EPROS which affords our customers better lead times, better service and technical support provision.

Our staff working with the application are highly experienced and manufacturer trained and are focused on delivering a quality and professional solution.

In most cases, we make use of the EPROS system which has passed the WRC short-term hydrostatic testing procedures and is used extensively throughout the world. We enjoy a collaborative working relationship with EPROS which affords our customers better lead times, better service and technical support provision.

The McAllister Group has installed thousands of CIPP patch repairs across England within the last 2 years but we have made use of these applications for over 30 years.